We offer Sash Window DIY kits, which consist of the same materials used by ourselves in our own, recondition service.

The kit contains all parts necessary to draught seal a wide variety of sash window sizes. These kits are only suitable for people with a good knowledge of woodworking skills and fully understand safe working practices.

One kit per window required

The kit contains

3 x Wooden staff bead
Size: 20x15 mm x 2.1 metres
 
2 x Wooden Parting Bead
Size: 27x 8 mm x 2.1 metres
   
 
1 x Pile Weather seal
Size: 8 mm x 15 metres
 
2 x Pile Carrier self adhesive
Size: 2.1 metres
   
 
Nylon plaited cord
Size: 6 metres

 
Redwood pine, primed white colour Weather pile, carrier & cord white colour

Cost: £85:00 nett per kit - Excludes delivery. Please contact us to order
Installation instruction advice supplied with every order

These kits draught proof sash windows up to 2.1metre high x 2.1metre wide.

Notes :
Sash windows over 1 meter wide - Existing top staff bead is retained. Should the top bead need replacing, then a matching staff bead without the pile carrier is available from most timber yards.

Sash windows over 2.1 m high – Use off cuts from the bottom bead, these should be joined 'on the mitre' and the pile continued through to the top of the frame. Joints that are made on the high of the window should not be noticeable.

Other sized beads available on request

Un-primed beads with brown or white pile available on request

Tools & Materials required

  • Protective clothing, dust mask, safety goggles.
  • General wood working tools: hammer, pincers, blunt chisel (25+ mm), paint scraper, screw drivers, hand plane, craft knife, nail punch, mastic & gun, paint brush, bathroom scales, mouse (a piece of string with a small lead weight on one end).
  • Power tools: Router with an 8 mm straight bit
  • Useful tools: Power planer & sander
  • Dust sheets, sandpaper, quick drying acrylic primer, exterior grade decorators caulk, 2 part epoxy filler, 25 mm carpet tacks, 40 mm panel pins.

Terms & condition of sale and use

Prices set out here in this web site are in British Pounds Sterling and are effective for the United Kingdom.

Heritage Sash Window Co. cannot accept orders until they have been paid for in full, including other charges such as delivery costs. Acceptance of an order will be carried out by e-mail upon full payment of the order (sent to the e-mail address provided with order details). Our acceptance of an order will create a legally binding contract between us, whether or not you receive the order confirmation by e-mail. We reserve the right not to supply you at our discretion

It is the sole responsibility of the user to satisfy themselves that the goods are suitable for the purpose for which they are intended and any implied condition that the goods are fit for any particular purpose is hereby excluded.

Goods are only to be installed by a competent wood worker with a full understanding of safe working practices. Suitable protective clothing including eye protection should be worn. We accept no liability whatsoever for any accident or injury caused relating to the use of our goods.

We aim to process orders for despatch within 28 days of sending our order confirmation

Any advice or information that we may offer is given to the best of our ability, but is given expressly without any liability on our part.
If the goods are found to be defective and reported within 14 days of purchase they may be exchanged. This does not extend to damage or misuse of the goods. The liability is limited to the exchange of goods for those originally supplied.